Aviosys 9268 Manual do Utilizador

IP Power 9268 User Manual Firmware Version: 1.3 Date Released: 06/16/2009 - 1 -

The Reset button is used to setup the RF device. Please go to (RF Connection Setup) for more instructions 4.) Link The link will show if the IP Power

4.) Setting up the IP Power 9268 Setting up the IP Power 9268: Note: For 220-250V, please use power cable that can support 10A current. Max Output

1.) Once IPEdit is open the device will automatically appear in the local devices section. Highlight the device and on the right side of IPedit the F

The Default Values of the IP Power 9268: IP Address: 192.168.1.192 Login: admin Password: 12345678 5.) After logging into the device Select the R

7.) Once the device has been setup click on RF control link to left of the page to check to make sure the device has been connected. Step 4: Acce

5.) Hardware Interface Controlling the Device Manually through the 9268-M The 9268-M allows the device to remotely be controlled through the internet.

“Super User” Password Reset In an even where the password cannot be recovered, the “super user” password reset can be used To reset the password: 1

Replacing the Fuse 1.) The fuse is located on the 9268-PR (Slave) between the power switch and the power input plugs. 2.) Carefully remove the fu

The default password for the 9268 Login: admin Password: 12345678 Logging In After the device has been configured it is time to login to the devi

Control Center Control Center The Control center is where the 9268PR (slave) device(s) are controlled. From this screen each device can be control

Warning: Any changes made to this equipment without permission may cause damages to the device! IMPORTANT NOTICE 1. IP Power 9268 was designed fo

Receiver Name: Receiver name is the Name of the Power Receiver that is selected. If no name has been selected then it will be left blank Receiver ID:

(Control Panel) From the control panel each power outlet for that device can be customized. Hit the apply button after the changes have been ma

2.) Make sure there is no device already connected on the webpage of the 9268-M (Master). If a device is already in the Receiver area, hit the “clear

DDNS Setup DDNS setup allows the IP Power 9268 to be used on DDNS. A DDNS account must be applied for The following information will need to be in

Email Setup The Email function of the IP Power 9268 allows the device to notify the user when changes have been made, power outlets are turned on or

Change Password The default login and password: Login: admin Password: 12345678 To change the password: 1.) Type in Old Password 2.) Type in the N

System Log The System Log keeps track of the movements of the IP Power 9268. From this page, information on the device, which ports are being will be

- 27 - 7.) Frequently Asked Questions (F.A.Q) Q1: How do I reset the device back to manufacturer default values? Ans: In the front panel of the 926

Table of Content 1.) WELCOME ... 5Introduction ...

Control Center ...

1.) Welcome Introduction The IP Power 9268 is a state of the art Power Distribution Unit (PDU) & Remote Power Control (RPC) system. The various ap

2.) Product Overview Features 1. One Master Connects 4 Receiver devices 2. Each slave device can connect up to a distance of 30 - 50 Meters 3. E

Package Contents Package Contents 1.) 9268-M (Master) Unit x 1 2.) 12V 1A Power Adapter 2.) 9268 PR (Power Receiver) Unit x 4 3.) Antenna Unit x

3.) Interface Description 9268-M (Master) Front View 1.) 9268 PR Device Selection: The PR Device Selection 2.) 9268 Reset: To reset to original m

Rear View 1.) 9268-M Network Jack RJ45: Connect the 9268-M to the Ethernet / internet though this jack 2.) 9268 Reset: Use a DC 5V 1A Power Adap